Selection and maintenance of aluminum alloy cutting fluid Factory Suppliers Manufacturers Quotes

Selection and maintenance of aluminum alloy cutting fluid

1. Characteristics of aluminum and aluminum alloy


1) Aluminum and aluminum alloys are soft and plastic, have large deformation during cutting, and are easy to stick to the knife. Forming a built-up edge on the tool may cause a phenomenon of melting welding, which causes the tool to lose cutting ability and affect the processing precision and surface roughness.

2) The aluminum alloy has a large thermal expansion coefficient, and the cutting heat easily causes thermal deformation of the work and reduces the processing precision.

3) The surface is prone to discoloration and pitting, and the surface is brown to black, which will precipitate white powder, commonly known as white rust.


2. Selection of aluminum alloy cutting fluid


Both the lubricity and the cooling performance are considered, and the emulsified cutting fluid or the low-viscosity cutting fluid is selected for finishing.


3. Aluminum alloy grinding


Since the grinding is very small, it is necessary to pay attention to the filterability of the cutting fluid. It is not possible to select a grinding fluid with too much consistency, otherwise the chips will not be deposited in time or filtered out, which will scratch the surface of the workpiece and affect the surface finish. Therefore, precision grinding oil or semi-synthetic cutting fluid is easy to use for fine grinding or super fine grinding.


4. Use and maintenance of aluminum alloy cutting fluid


1) Use tap water, preferably deionized water to ensure the use effect and service life of the cutting fluid.

2) The machine tool should have a filtering system, and clean and clean the filter or non-woven fabric for at least 3 days. Because the aluminum alloy is easy to form aluminum soap, the stability of the cutting fluid is destroyed. Aluminum chips should be filtered out immediately to avoid the reaction of aluminum chips with the cutting fluid and affect the effect and life. During the grinding process, the aluminum chips are small and light, and it is difficult to precipitate. If not filtered or insufficiently filtered, the aluminum chips will scratch the surface and affect the surface gloss.

3) Ph value. Aluminum is very sensitive to the Ph value of the cutting fluid. It is necessary to regularly check the Ph value of the cutting fluid. It is found that the abnormality should be adjusted in time so that the Ph value is controlled between 8-9, so as to avoid the Ph value is too high to corrode the workpiece, Ph value Too low allows the bacteria to multiply, affecting the stability and performance of the cutting fluid.

4) Add new liquid at regular intervals. That is to ensure the good lubrication of the cutting fluid, but also to ensure good rust resistance and sterilization and anti-corrosion performance of the cutting fluid to prolong the service life of the working fluid.

5) Pay attention to the method of preparing new liquid, and pay attention to when to add diluent and pay attention to the method of deep management

654654.jpg3 (2).jpg

LK offer professional precision custom manufacturing hardware plastic accessories services. Professional efficient,quality assurance,fast delivery,competitive price.Include3-5axies CNC milling and turning parts,casting parts,molding parts etc.


We have boasted 10year's experence in serving many industries,such as medical devices, electronics, optical communication, automotive, LED,Leadframe,Toy,Automation equipment Aerospace and Defence,semiconductor industry, since it was found in 2007.


Located in Shenzhen China with over 2,000 square foot facility.LK is fully equipped with over 20sets most advanced high-speed NC machines from Janpan and TaiWan.Gathers lots of talents and international standard Management talents.


As an ISO9001:2008certified workshop,we are specialized in cnc turning,cnc milling,cnc grinding,cnc bending, laser cutting, EDM, wire cutting stamping,casting,surface treatment. We are committed to providing our best service to our valued customers with superior quality competitive price,and dependable on-time delivery.


Our goal is to be your one-stop custom manufacturing shop in china. Now,we are ready to support you with all kinds of custom manufacturing needs,for your any quote on custom parts,welcome to LK


Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
Message