Heat treatment classification Factory Suppliers Manufacturers Quotes

Heat treatment classification

The role of heat treatment is to improve the mechanical properties of the material, eliminate residual stress and improve the machinability of the metal. According to the different purposes of heat treatment, the heat treatment process can be divided into two categories: preliminary heat treatment and final heat treatment.


Preparatory heat treatment

The purpose of the preliminary heat treatment is to improve the processability, eliminate the internal stress, and prepare a good metallographic structure for the final heat treatment. The heat treatment process includes annealing, normalizing, aging, quenching and tempering.


(1) Annealing and normalizing

Annealing and normalizing are used for hot worked blanks. Carbon steel and alloy steel with a carbon content greater than 0.5% are easy to cut to reduce their hardness, and are often annealed; carbon steel and alloy steel with a carbon content of less than 0.5%, in order to avoid the hardness is too low, the cutting knife when cutting, It is treated with normalizing. Annealing and normalizing can refine grains and uniform structure for later heat treatment. Annealing and normalizing are often arranged after the blank is manufactured and before the roughing.


(2) aging treatment

The aging treatment is mainly used to eliminate the internal stress generated in the blank manufacturing and machining.


In order to avoid excessive transportation workload, for general precision parts, arrange an aging treatment before finishing. However, parts with higher precision requirements (such as the box of the coordinate boring machine) should be arranged twice or several times. Simple parts are generally not subject to aging.


In addition to castings, for some precision parts with poor rigidity (such as precision lead screws), in order to eliminate the internal stress generated during machining and stabilize the machining accuracy of the parts, multiple aging treatments are often arranged between roughing and semi-finishing. Some shaft parts are processed and aging treatment is also required after the straightening process.


(3) tempering

The quenching and tempering is a high-temperature tempering treatment after quenching, which can obtain a uniform and fine tempered sorbite structure, and prepare for the subsequent surface quenching and nitriding treatment to reduce deformation, so quenching and tempering can also be used as a preliminary heat treatment.


Since the comprehensive mechanical properties of the parts after quenching and tempering are good, parts with low hardness and wear resistance are also required as the final heat treatment process.


2. Final heat treatment

The purpose of the final heat treatment is to improve mechanical properties such as hardness, wear resistance and strength.


(1) quenching

Quenching has surface hardening and overall quenching. Among them, surface quenching is widely used because of deformation, oxidation and decarburization, and surface quenching also has the advantages of high external strength, good wear resistance, and good internal toughness and impact resistance. In order to improve the mechanical properties of the surface hardened parts, heat treatment such as quenching or normalizing is often required as a preliminary heat treatment. The general process route is: blanking-forging--normalizing (annealing)--roughing--tempering--semi-finishing--surface hardening--finishing.


(2) Carburizing and quenching

Carburizing and quenching is suitable for low carbon steel and low alloy steel. Firstly, the carbon content of the surface layer of the part is improved. After quenching, the surface layer obtains high hardness, while the core still maintains a certain strength and high toughness and plasticity. Carburizing is an integral carburizing and local carburizing. For partial carburization, anti-seepage measures (copper plating or plating impervious materials) shall be adopted for the non-carburizing part. Due to the large deformation of carburizing and quenching, and the carburizing depth is generally between 0.5 and 2 mm, the carburizing process is generally arranged between semi-finishing and finishing.


The process route is generally: blanking-forging-normalizing-coarse, semi-finishing-carburizing quenching-finishing. When the non-carburized part of the partially carburized part is increased in excess, the process of cutting off the excess carburized layer shall be arranged after carburizing and before quenching.


(3) Nitriding treatment

Nitriding is a treatment method in which a nitrogen atom is infiltrated into a metal surface to obtain a nitrogen-containing compound. The nitriding layer can improve the hardness, wear resistance, fatigue strength and corrosion resistance of the surface of the part. Because the nitriding treatment temperature is low, the deformation is small, and the nitriding layer is thin (generally not more than 0.6~0.7mm), the nitriding process should be arranged as far as possible, in order to reduce the deformation during nitriding, it is generally required after cutting. High temperature tempering for stress relief

IMG_5027.jpgIMG_5050.jpg

LK offer professional precision custom manufacturing hardware plastic accessories services. Professional efficient,quality assurance,fast delivery,competitive price.Include3-5axies CNC milling and turning parts,casting parts,molding parts etc.


We have boasted 10year's experence in serving many industries,such as medical devices, electronics, optical communication, automotive, LED,Leadframe,Toy,Automation equipment Aerospace and Defence,semiconductor industry, since it was found in 2007.


Located in DongGuan China with over 2,000 square foot facility.LK is fully equipped with over 20sets most advanced high-speed NC machines from Janpan and TaiWan.Gathers lots of talents and international standard Management talents.


As an ISO9001:2008certified workshop,we are specialized in cnc turning,cnc milling,cnc grinding,cnc bending, laser cutting, EDM, wire cutting stamping,casting,surface treatment. We are committed to providing our best service to our valued customers with superior quality competitive price,and dependable on-time delivery.


Our goal is to be your one-stop custom manufacturing shop in china. Now,we are ready to support you with all kinds of custom manufacturing needs,for your any quote on custom parts,welcome to LK.


Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
Message